Skip to content

How do I search the words in a scanned PDF?

Search scanned PDFs on a Mac

Updated Tested on macOS 26.6.2. Not yet tested on macOS 27.

A scanned PDF is a picture of each page, with no text layer, so Spotlight and Preview’s find usually can’t search its words. Preview’s File › Export › Embed Text can add a text layer to a copy. Live Text can read a page you open, and the Notes app can search the scans you make in it.

You scanned a lease, a receipt or a letter from the bank, and now you need one word from it. The PDF opens fine and the word is right there on the page, yet Spotlight can’t find the file and a search inside it comes back empty. This guide explains why, then covers what macOS gives you to fix it: Preview’s Embed Text, Live Text and the Notes app, with the limits of each.

The findings below that carry a date come from two made-up scans checked on 6 November 2026, on a Mac running macOS 26.6.2, with scripts run from the Terminal. No app was used for those checks, so Preview’s own steps come from Apple’s guides, not from a run. The rest comes from the sources listed at the end. DejaShot is one of the options, and it’s ours, so weigh that section accordingly.

Why can’t you search a scanned PDF?

Because a scan is a picture of a page. A PDF made from a document or a web page holds its words as text, a text layer that search, copy and Spotlight all read. A scanner, or a phone’s camera, saves an image of the paper instead, and the PDF wraps that image. Unless something recognised the words and added them, the file has no text layer at all, so there is nothing for a search to match.

We checked two made-up scans with PDFKit, the framework Preview is built on: a five-line invoice and a full page of a letter, each page only an image of text. Both text layers were empty, and a find for words printed on them, such as the made-up names Corvelline and Thistlecombe, found 0 matches.

The quickest check of your own file is the same one: search the PDF for a word you can see. If a clear, printed word comes back with no match, the page most likely has no text layer.

Can Spotlight search a scanned PDF?

Usually not. Spotlight’s PDF importer reads a PDF’s text layer. On 4 November 2026, run on a made-up scanned receipt, it stored no text at all for the page, as the guide to searching inside screenshots, PDFs and photos on a Mac reports. Howard Oakley of The Eclectic Light Company found the same in January 2024, on macOS Sonoma: macOS couldn’t index the text in a PDF made from scans, though Live Text could still read it.

That can seem odd, because Apple’s iMac guide for macOS Tahoe 26 says: “With Live Text, Spotlight can search for text in images (available in select languages).” Pictures saved as image files are one thing. A picture inside a PDF is another, and Oakley reports that images inside PDFs aren’t covered. So a screenshot of a page may turn up in Spotlight while a scan of the same page doesn’t.

For the wider picture of what Spotlight does and doesn’t read, see Spotlight and Live Text compared with DejaShot.

Can Preview search a scanned PDF?

Not on its own. Apple’s Preview guide says the search field finds the exact phrase you type and can sort matches by page. That search works on the text layer, so on a scan it has nothing to look through, the same way our PDFKit find found 0 matches.

Preview also has Live Text, which reads the words in a picture so you can select and copy them. Apple’s page on it covers photos and images and doesn’t mention PDFs, so it doesn’t say whether you can select the words on a scanned page in Preview. The two fixes below don’t depend on it.

How do you add a text layer with Preview’s Embed Text?

Preview can recognise the words in a scan and save a copy with a text layer. Apple’s steps:

  1. Open the scanned PDF in Preview.
  2. Choose File › Export.
  3. Select Embed Text.
  4. Give the copy a new name, so you can tell the two apart, and click Save.

Apple says Preview then “scans for text and embeds it so it can be selected in any PDF viewer.” The option appears only if no text was recognised in the document before, so a PDF that already has a text layer won’t offer it.

How well it reads is where testers disagree. Apple presents it as a way to make a scan searchable. In the comments on his January 2024 post, written on macOS Sonoma, Oakley called the result “by far the worst OCR I have ever seen”. He found that with a small amount of text it seemed to work well, but that asked to do whole pages it “falls to bits”. He also notes that this poor reading isn’t Live Text.

So treat the copy as something to check, not something to trust. The next section shows how.

How do you check that the text layer worked?

Open the copy and search for three or four words you can see on the page, including a long word, a name and a number. Each one should be found where it’s printed. Then drag across a line, copy it, and paste it into TextEdit next to the page. A word that comes out misspelled is a word a search will miss.

If the result is good, the copy behaves like any PDF with a text layer. Spotlight’s PDF importer took the full text of a made-up PDF with a text layer on 4 November 2026, as the guide to searching inside screenshots, PDFs and photos reports, so the copy’s words can reach Spotlight too, once it’s indexed. Keep the original scan as well: it’s the record of what the paper said.

If the result is poor, try the scan again at a higher resolution, flat and straight, with good contrast. Or use Live Text on the page instead, as below.

Can Live Text read a scanned page?

Yes, when the page is in front of you as an image. Live Text reads text in pictures, and Apple’s Preview guide gives the steps for an image: hold the pointer over the text, drag to select it, Control-click and choose Copy Text. If nothing selects, choose Tools › Text Selection.

To get one scanned page as an image, take a screenshot of it. Apple’s screenshot guide says ⇧⌘4 lets you drag across part of the screen, and the screenshot is saved as an image file.

The reading itself is good. We ran Apple’s Live Text engine on both made-up scans, each page drawn as an image. It read all 219 words of the letter in order, on a page set in small type, a little crooked, on speckled paper. It read every word of the invoice too, with the total read last instead of on its line.

Live Text gives you the words of one page to copy. It doesn’t make the PDF searchable later, and it reads a limited list of languages, which Apple’s feature availability page lists. There’s more on it in copying text from a screenshot on a Mac.

Can the Notes app make a scan searchable?

Yes, for scans you make in Notes. Apple’s Notes guide lists “Text in a scanned document attached to a note” among what Notes search finds, along with PDF files you’ve attached.

On a Mac, you scan into a note with an iPhone or iPad. Apple’s Continuity Camera page gives the steps: in a note, Control-click and choose Scan Documents, or choose File › Insert from iPhone or iPad › Scan Documents. Hold the paper in front of the camera on your phone, tap Save, and the scan arrives in the note as a PDF. Both devices need Wi-Fi and Bluetooth on and the same Apple Account.

This suits new paper. It doesn’t help with the scanned PDFs already in your folders, and the search lives in Notes, not in Spotlight or the Finder.

What does DejaShot do differently?

DejaShot reads the text in every screenshot, photo and PDF, scanned pages too, in the folders you choose. It reads a scanned page from its image, with the Mac’s own text recognition, so a scan with no text layer is searchable by its words, up to the first 100 pages of each PDF.

It doesn’t add a text layer or save a copy. Your PDFs stay as they are, because DejaShot reads your folders and never changes them on its own. Press ⇧⌘Space from any app and type a word you remember, and the scan comes up with your words marked. Type a question and it shows you the file, never makes up an answer.

Its limits: text recognition reads English by default, with more languages in Settings. It skips any file over 100 MB, and a PDF locked with a password shows “This PDF has a password” instead of being read.

Everything stays on your Mac, with no account. It needs macOS 14 or later, on Apple silicon or Intel, and you pay once. The details are on the pricing page.

Which way should you use?

WayFinds a scan’s wordsWhat you getNeeds
SpotlightUsually not, with no text layerA search across your MacBuilt in
Preview’s searchOnly after a text layer is addedA search inside one PDFBuilt in
Preview’s Embed TextIn the copy it savesA copy with a text layer, to checkBuilt in
Live TextOn one page you look atWords to copyBuilt in
NotesIn scans you make in NotesA search inside NotesAn iPhone or iPad
DejaShotIn every scanned page it readsA search across the folders you chooseOne-time, see pricing

The short version. For one scan you need to search again and again, Embed Text, then check the copy. For a few words now, Live Text. For new paper, scan it into Notes. If you keep many scans in your folders, DejaShot reads them as they are.

Frequently asked questions

Why can’t I search the words in a scanned PDF?

A scanner saves a picture of each page, not the words on it. A search reads the text layer of a PDF, and a scan has none unless something added one, so a word you can see on the page can still come back with no match.

Can Spotlight find a scanned PDF after Embed Text?

It can find the words Embed Text added. Spotlight reads a PDF’s text layer, so once a copy has one, its words can reach the index like any other PDF. Words that were recognised wrongly are stored wrongly, so search the copy for a few of them first.

Can the Notes app search a scanned document?

Yes, for scans in your notes. Apple says Notes search finds text in a scanned document attached to a note. On a Mac you scan into a note with an iPhone or iPad, using Scan Documents, and the scan arrives as a PDF.

Where should you go next?

For screenshots and photos as well as PDFs, start with searching inside screenshots, PDFs and photos on a Mac. If Spotlight misses files it should find, see what to do when Spotlight isn’t finding your screenshots.